Tally error solutions: the 10 most common errors and how to fix them
Short answer: Most Tally error solutions come down to a few causes: a licence or TSS problem, Tally looking in the wrong data folder, damaged company data, an outdated release or customisation, network trouble in multi-user setups, or incomplete GST masters. Always back up your data first, then work through the fixes below. If an error keeps coming back, your setup needs a proper health check.
Tip: Before trying any fix: take a copy of your Tally data folder. Most data problems are only serious when there is no backup.
1. Licence not activated or “licence in use”
Usually the licence wasn’t activated on this computer, was moved without being surrendered, or (on Gold) another machine is holding it. Check the licence status inside TallyPrime, make sure the computer can reach the internet, and reactivate if needed. Your Tally partner can see your licence details and help reset it.
2. Company not found / wrong data path
Tally is opening a different data folder than the one your company is stored in — common after a reinstall, a new computer or a moved folder. Point TallyPrime to the correct data location and select the company again.
3. Errors while opening a company (damaged data)
Power cuts, forced shutdowns and failing disks can damage company data. Restore the latest good backup, or use TallyPrime’s built-in data repair on a copy of the data. Then fix the cause — a UPS, a healthier disk, or a cloud server with automatic backups such as Tally on AWS.
4. Memory access violation
Often caused by a damaged data file, an incompatible customisation (TDL) or a problem with the installation. Try opening the company with customisations switched off; if it opens, the TDL needs updating. If not, repair a copy of the data or reinstall TallyPrime.
5. Tally is slow or hangs
Large data, an old computer, antivirus scanning the data folder, or many users on a weak network. Archive old years, exclude the data folder from real-time scans, and size the hardware to your users. For multi-branch teams, a properly sized cloud server keeps Tally fast.
6. e-Invoice, e-way bill or remote access not working
If connected services suddenly stop, check your TSS first — e-invoicing, e-way bills, remote access, data sync and the official add-ons need an active TSS. See what happens when Tally TSS expires.
7. e-Invoice rejected
Almost always a master-data issue: invalid buyer GSTIN, missing HSN/SAC, a PIN code that doesn’t match the state, or a duplicate invoice number. Correct the master and resend. Our e-invoice in TallyPrime guide lists the common causes.
8. Invoice format or report broken after an update
Custom formats and reports are built in TDL. A new TallyPrime release can need the customisation to be updated and tested. Ask your developer to test against the current release — see what TDL is.
9. Old data won’t open in TallyPrime
Data from an older Tally version has to be migrated before TallyPrime can use it. Migrate a copy, check the opening balances and key reports, and only then switch over.
10. Other users can’t connect to Tally Gold
In multi-user setups, check that every computer is on the same network, that a firewall isn’t blocking Tally, and that the licence server machine is switched on. For teams in different locations, remote access or a cloud server is more reliable than a stretched office network.
When to call support
If the same error returns, or your books are stuck at month-end, call us. Dexterity’s Tally support and AMC covers phone, remote and on-site help in Pune, backups and health checks, with under 2-hour response on the Priority plan. We support systems we didn’t install too — we start with a health check.
Support & AMC. Phone, remote and on-site Tally & ERP support with priority response under 2 hours. Annual plans with backups and health checks. See Support & AMC · Send an enquiry
Frequently asked questions
What should I do first when Tally shows an error?
Take a copy of your Tally data folder before trying any fix. Then check the licence, the data path and your TSS status — these cause most errors.
Why has e-invoicing stopped working in Tally?
The most common reason is an expired TSS, since connected e-invoice and e-way bill need an active Tally Software Services subscription. Rejections on individual invoices are usually due to GSTIN, HSN or PIN code errors in masters.
Do you fix Tally errors on systems you didn’t install?
Yes. Dexterity supports TallyPrime setups installed by others, starting with a health check of your current setup.
Sources and references
Prices, steps and rules in this guide come from the official pages below, checked on 15 November 2026. They change, so confirm on the source before you act.
- Licensing Error Codes in TallyPrime - Reasons and Possible Solutions (Tally Help)
- FAQs on Data Migration & Data Corruption (Tally Help)
- How to Repair Company Data in TallyPrime (Tally Help)
- Memory Access Violation (MAV) - FAQ (Tally Help)